Fall Sale: 10% off with code FALL10 — up to $100 off Promotional pricing on hundreds of items Financing available on orders $500+ — apply in minutes Hablamos español. We reply in Spanish and other languages by email or message BBB Accredited Business with an A+ rating

Work Table With Backsplash or Flat Top: How to Choose

Choose a work table with a backsplash when the back edge stands against a wall, and a flat top when the table stands in the open, is worked from both sides, or has to butt against another table. The backsplash is a turned-up lip along the back that keeps food, liquid and small tools from going over the edge into the gap at the wall, and it is the most common choice for wall lines of commercial work tables.

What a backsplash does and does not do

A backsplash stops crumbs, liquid and small tools from sliding off the back of the table, and it protects the wall from splatter when you cut, mix or portion. It does not seal the table to the wall. Liquid can still run into the joint between the backsplash and the wall, so that joint still has to be cleaned or sealed.

On a flat top nothing stops items going off any edge, which is exactly what you want on an island: sheet pans and cutting boards slide off any side, and staff can work from both sides.

Backsplash heights on our tables

Backsplash height varies by table type. These figures come from our product pages:

  • Standard stainless work tables with a backsplash: 1.5 in. Our backsplash table has an 18 gauge type 430 stainless top, a galvanized undershelf and 14 sizes from 36 x 18 to 96 x 30 in.
  • Corner work tables: the CWT-2424 and CWT-3030 have a rear backsplash to protect the walls, in 24 x 24 or 30 x 30 in.
  • Work tables with a built-in sink: 5 in. The Prepline ST-3048 and ST-3060 are 30 in. deep with a 16 x 20 x 12 in. sink, a deck mount faucet and a 5 in. backsplash, and our EKQ-WTPS has a 16 x 16 x 12 in. prep sink and a 5 in. backsplash on a 304 stainless top.

In common practice a low backsplash is enough for dry prep. The taller backsplashes sit where water sprays, at sinks and dish areas.

When to choose a backsplash

  • The back edge of the table touches a wall.
  • The table is part of a wall line next to a sink or a cook line.
  • You prep wet items, sauces or anything that splashes.
  • The wall behind the table is hard to clean, such as painted drywall.

When to choose a flat top

  • The table stands in the middle of the room as an island or a center prep line.
  • Staff work from both long sides.
  • You want to push two tables together end to end or back to back for a longer or deeper surface. Two backsplash tables cannot go back to back without leaving a gap.
  • The table is on casters and moves around the kitchen. Our stainless work tables with 2 shelves and casters, for example, come in 24 sizes from 12 x 24 to 96 x 30 in., with four casters, two of them locking.

Flat top options from our range include the standard stainless work table with adjustable undershelf in 31 sizes from 24 x 12 to 72 x 30 in., and the open base work table in 25 sizes from 20 x 20 to 72 x 30 in., which leaves the floor below clear for bins and carts.

What the Food Code says about the wall joint

The Food Code does not require a backsplash. What it covers is the space around fixed equipment. Section 4-402.11, which we read today in Virginia’s adoption (12VAC5-421-1550), says equipment that is fixed because it is not easily movable has to be installed so it is spaced to allow cleaning along the sides, behind and above it; spaced no more than 1/32 inch from walls and adjoining equipment; or sealed to the wall or adjoining equipment if it is exposed to spillage or seepage. A table that is easily movable for cleaning is treated differently. Your local health department has the final say on how this applies to your tables. We cover the options in more detail in our article on whether a work table needs to be sealed to the wall.

Placement test

Stand where the table will go and ask three questions:

  • Does the back edge touch a wall? Choose a backsplash.
  • Will anyone reach across it from the back? Choose a flat top.
  • Will it ever be pushed against another table? Choose a flat top, or plan the layout so backsplashes only face walls.

If one end touches a wall and the other is open, a backsplash along the long side is still the usual choice.

Equipment on top

A backsplash takes up a little of the usable depth. If you plan to set a mixer, slicer or countertop fryer on the table, measure the equipment depth and check it fits in front of the backsplash with room to work. For griddles, charbroilers and hot plates, an equipment stand is often the better base: our equipment stand puts the cooking surface at 24 in. and has a raised lip on three sides to keep equipment and spills from going over the back and sides. See our equipment stands.

Adding storage above and below

Both top styles take storage. Overshelves mount on the table and add one or two shelves above the work surface; our single overshelf is 12 in. deep in six lengths from 24 to 72 in., and its mounting hardware is not included. Wall shelves hang on the wall above a backsplash table instead. Compare overshelves and wall shelves. Below the top, an under-table stainless steel drawer for work tables keeps small tools off the surface.

Mistakes to avoid

  • Buying backsplash tables for an island, then finding staff cannot use the back side.
  • Buying flat tops for a wall line and watching food drop behind them every shift.
  • Planning to push two backsplash tables back to back.
  • Leaving the wall joint unsealed and uncleaned because the backsplash looks like a seal.
  • Ordering a sink table without planning hot and cold water and a drain. The ST-3048 page notes that a plumber usually makes the final connections.

Frequently asked questions

Does the health code require a backsplash on a work table?

No. The Food Code covers spacing and sealing around fixed equipment, not backsplashes. A backsplash helps keep the wall joint clean, but the joint may still need sealing or space for cleaning. Ask your local health department what it expects.

How tall is the backsplash on your work tables?

Our standard backsplash work tables have a 1.5 in. backsplash. The work tables with a built-in sink, such as the Prepline ST-3048, ST-3060 and our EKQ-WTPS, have a 5 in. backsplash.

Should an island table have a backsplash?

Usually not. An island is worked from both sides, and a backsplash blocks the back edge. A flat top suits it better.

Can I put two work tables back to back?

Yes, if both are flat tops. Two backsplash tables leave a gap between them that is hard to clean.

Freight to the 48 contiguous states is included in the price, and non-powered items such as work tables have a 14-day return window. Not sure which top fits your line? Call 877-558-2253.

Models in this guide at a glance

The models linked above are listed here with the main points from each product page, so you can compare them side by side before opening the full listings.

Stainless Steel Work Table with Undershelf & 1.5″ Backsplash

  • Brand: Express KitchQuip
  • Stainless Steel Work Table
  • Durable 18-gauge steel
  • Storage Galvanized shelf

Stainless Steel Work Table with Open Base, 1.5″ Backsplash

  • Brand: Express KitchQuip
  • Stainless Steel Work Table Open Base
  • Heavy-Duty 18GA
  • Spacious Open base storage

Prepline ST-3048 30″ x 48″ Stainless Steel Work Table (model ST-3048)

  • Brand: Prepline
  • With Sink and Faucet
  • Stainless Steel Build
  • Adjustable Undershelf Design
  • Warranty: 1-Year Parts & Labor

Prepline ST-3060 30″ x 60″ Stainless Steel Work Table (model ST-3060)

  • Brand: Prepline
  • With Sink and Faucet
  • Stainless Steel Build
  • Adjustable Undershelf Design
  • Warranty: 1-Year Parts & Labor

Stainless Steel Single Overshelf for Long Prep Work Table

  • Brand: Express KitchQuip
  • Stainless Steel Single Overshelf
  • Sturdy 18-gauge steel
  • Spacious Maximizes space

Stainless Steel Double Over-Shelf with Mounting Brackets for Work Tables

  • Brand: Express KitchQuip
  • Stainless Steel Double Over-Shelf – Adds vertical storage above work tables
  • Includes Mounting Brackets – Designed for secure attachment to compatible tables
  • Durable Metal Construction – Suitable for everyday commercial kitchen use

Before you order

  • Measure the space and every doorway on the delivery path, and compare them with the dimensions on each product page.
  • Check the spec sheet for power, gas or water requirements and match them to what your building has.
  • Compare capacity with your busiest day rather than your average day.
  • Read the warranty terms for the brand before you order.

Delivery, warranty and payment

  • Delivery: delivery within the continental US is included in the price on the product page, and freight orders include liftgate service.
  • Warranty: each product carries its manufacturer warranty. Terms by brand are on our warranty page.
  • Financing: lease-to-own financing through Clicklease is offered on items of $500 and up. See how financing works.
  • Quotes: buying for a business and need a written quote? Call +1-877-558-2253 or use our contact page.

Not sure which model fits?
Call +1-877-558-2253 with your space, power supply and daily volume, and we will help you narrow it down.