Commercial Sink Faucets

Commercial sink faucets and plumbing parts: wall mount faucets with 8″ centers, 4″ center hand sink and gooseneck faucets, pre-rinse assemblies, wok range faucets, a service sink faucet, knee and foot pedal valves and lever waste drains. Most are NSF certified. Freight is included in every price shown.

Showing all 14 resultsSorted by popularity

How to choose

Center measurement

Measure the distance between the hot and cold inlets on your sink or wall. Most compartment sinks use 8" centers; most hand sinks use 4" centers.

Type

  • Pre-rinse assemblies spray dishes before they go into the dish machine.
  • Wok faucets swing over a wok range to fill and rinse woks.
  • Knee and foot pedal valves allow hands-free operation at hand sinks.
  • Lever waste drains open and close compartment sink drains without reaching into the water.

Compare our commercial sink faucets

Every model below is in stock. The description comes from each listing; click through for full specs.

ModelWhat it is
10" Wall-Mount Wok Range Faucet - Heavy Duty10" Wall-Mount Wok Range Faucet - Heavy Duty Commercial
Commercial Sink Faucet with 8" CenterCommercial Sink Faucet with 8" Center
DBL FOOT VALVEStainless Steel Dual Foot Pedal Control for Sink Faucet
Express KitchQuip EKQ-WTPSStainless Steel Work Table with Built-In Prep Sink & Faucet - NSF Certified
FCT-WM-PR-ADD-A3Wall-Mounted Pre-Rinse Faucet with 8 in. Centers and 12 in
HFC-35Commercial Hand Sink Replacement Faucet Fits any 4" Center
HFC-4Commercial Stainless Steel 4" Wall-Mount Gooseneck Faucet
KV4Commercial Dual Control Knee Pedal Valve for Faucet
PPRS-12Wall-mounted Pre-rinse Assembly with 12" Swing Spout
TMWSF-865Service Sink Faucet
TTLD-35Twist Handle Lever Waste Drain
TTLD-35ETwist Handle Lever Waste Drain
TWF-12Wok Faucet TWF-12 - Commercial Wall Mount 12" Swivel Spout
Wall Mount Commercial Kitchen Faucet - 8"Wall Mount Commercial Kitchen Faucet - 8" Center with Swivel Spout (Multiple Sizes)

Frequently asked questions

What faucet center do I need?

Measure the distance between the two holes in your sink deck or backsplash. Hand sinks often use 4 in. centers; compartment sinks usually use 8 in. centers.

Deck mount or splash mount?

Deck mount faucets go through holes in the sink deck. Splash mount faucets go through the backsplash. Match the faucet to where your sink holes are.

Are they certified?

Most of our faucets are NSF certified. Check each product page.

Do you sell sinks?

Yes. See commercial restaurant sinks and hand sinks.

Is freight included?

Yes. Freight and liftgate delivery are included on every order to the continental United States, with nothing added at checkout.

What to check before you order

Look at the sink before the faucet. Note whether the holes are in the backsplash for a wall-mount faucet or in the deck, and measure the distance between hole centers, since the faucet must match it. Then choose spout length so the water lands in the middle of the bowl; on multi-compartment sinks a swing spout should reach every bowl it serves. Pre-rinse units need overhead clearance. A frequent mistake is ordering by looks and finding the centers do not line up.

Related equipment: commercial sinks, plumbing supplies and hand sinks.

Popular in this category

Most asked for: our commercial hand sink faucet, which fits any 4" center hand sink, and the commercial wall mount faucet with an 8" center and swivel spouts from 6" to 16".